To cozy up my kitchen for fall, I decided to add a DIY cafe curtain to the window above my sink. Cafe curtains are timeless, but they do seem to be having a moment right now.When we renovated our kitchen a couple of years ago, it was spring, and I was focused on creating a light, bright space with a fresh coastal cottage feel. Now that a few seasons have passed, I thought it was time to add a little softness and warmth for the cooler months. You can see how the kitchen looked after the renovation in my galley kitchen renovation reveal post.

Turning a Pillowcase into a Cafe Curtain
To make this cafe curtain I used a pillowcase! Earlier this year I purchased a pretty brown gingham duvet cover which came with 2 matching pillowcases.

I didn’t need the cases but I stashed them in my linen closet. I was all set to purchase a ready made cafe curtain for my kitchen when I remembered I had the pillowcases. It was so simple to turn one of them into a cafe curtain. Here’s how:
Measuring and Sewing the Curtain Panels
1. Separate the pillow case into 2 matching pieces by cutting apart the front and back along the seamed edges.

2. Cut each piece down to 24 inches wide. My window is 30 inches wide and the rule of thumb is your curtain should be 1 and 1/2 to 2 times the width of your window. I wanted my curtain to have a little fullness when closed but not so full that it covered too much of the window when open. So I went with about 1 1/2 times the width:
30 in. x 1.5 = 45 in. divided by 2 = 22.5 inches for each panel
3. Fold the top and two side edges over to the wrong side about 1/2 inch and then fold again another 1/2 inch. Press and sew.

4. For the bottom hem, it’s best to hang the curtain first so as to account for the rod and hooks.
Installing the Cafe Curtain Rod
I purchased a custom length inside mount cafe rod in unlacquered brass, along with 12 tiny pinch on rings, both from Rejuvenation Hardware. You can choose from several finishes as well as an inside mount or outside mount. This was easy to install with a drill to pre-drill the screw holes for the brackets and a manual screwdriver. In terms of how high to mount the rod, I wanted it to just cover the latches that open and close the window so they weren’t sticking out above the the rod.




Hemming and Hanging the Finished Cafe Curtain
.Once I put the two panels on the rod, it was easy to measure down to the window sill and pin the hem. I sewed it like I did the top and side seams except the hem was about 1 inch instead of the narrow hem I used on the top and side seams. Usually I do a wider hem but this was all the fabric I had so 1 inch it is!



This was a high/low project – the brass rod and rings were on the pricey side but the curtain literally cost me nothing! I like to save wherever I can so I can afford to splurge on things like real brass hardware. We have other brass elements in our kitchen so I wanted to continue with that theme.



A Few More Tips
No-sew cafe curtains can be made from dishtowels or even cloth napkins. In a previous home, I used two Pottery Barn napkins I found on clearance to create a completely no-sew window treatment. You can see that project here: DIY No-Sew Cafe Curtains.
A tension rod is also a budget-friendly alternative to the brass cafe rod I used. It’s a great option if you’re not sure you want to commit to a permanent installation or simply prefer an easy, no-drill solution.
Happy Decorating!
Debra
Discover more from The Home Spun Styling Co.
Subscribe to get the latest posts sent to your email.


Pingback: 18 Farmhouse Kitchen Window Treatments For The Window Over Your Sink